Human Detector Shop

Human Detector

HDF-TOUCH  Alarm Moduleshop

 

SENSOR MODULE FOR THE CAPACITIVE PROTECTION OF OBJECTS 

hdf_shock.jpg

HDF-TOUCH secures:

  • Showcases and display cases
  • Pedestals and steles
  • Furniture and porcelain
  • Technical exhibits
  • Jewelry, coins, etc.
  • Vehicles
  • Models and much more

hdf door useThe HDF-TOUCH wireless alarm module enables capacitive protection of objects in museums up to the vehicle size. A sensor plate and a reference plate are connected via a plug-in contact. Objects made of metal, e.g. cups, but also automobiles, can be connected directly. There are 64 levels for the adjustment of the sensitivity. Therefore an alarm is triggered before the actual physical contact. A maximum battery life of 12 months is possible, depending on the selected sensitivity and type of object. The operating time of the sensor module can be extended to several years by using external batteries. After that time, the battery must be changed or recharged. The integrated 868 Mhz transmitter module achieves a high range even in solid buildings such as castles and palaces. The Human Detector Flex sensor HDF-TOUCH can be combined with all alarm and voice output devices (such as HDF-BUZZER and HDF-SPEECH) and the alarm monitoring unit HDF-AMD.

 

The highlights at a glance, please click on the pictogram for further information:

reichweite intern dt sicher dt batterie monitoring dt netz batterie dt
kapazitiv dt size dt montage dt  
easy mode dt multi mode dt profi mode dt  

 

TECHNICAL SPECIFICATIONS

 

Technology Wireless sensor module for capacitive field monitoring
Detection method Massless projected capacitive field change (PCAP)
Emphatic installation Any hidden installation location near the sensor and reference plate.
Maximum distance between sensor module and sensor plate approx. 200 cm.
Transmission frequency 869,5 MHz 
Transmission power  + 15 dBm
Range Up to 1500 m in open area, good penetration of walls due to modulation with
frequency spread spectrum modulation *1
Supply voltage 3 V lithium battery CR2450 changable, external supply voltage 8-14 V AC/DC  *2
Supply current Typically 60 to 560 µA in standby (depending on setting), 50 mA during transmission
Response time Typically 50 ms for complete transmission
Other functions Concealed micro switch for switching on and off
Micro push-button for linking individually and for test mode
Connector for connecting the sensor and reference plate
Battery life up to 12 months depending on measurement settings *3
Extend battery life with external battery/rechargeable battery
64 selectable sensitivity levels, standard and energy-saving mode
Monitoring strength of receive signal
Monitoring battery voltage (alarm before end of battery life)
All operating modes supported (EASY-, MULTI- and PROFI-Mode) *4
LED 3 mm LED red indicating radio operation, 3 mm LED green indicating program function
Dimensions 70,4 mm (L) x 50,4 mm (W) x 17 mm (H)
70,4 mm (L) x 60 mm (W) x 17 mm (H) with connector
Weight Approx. 43 grams including battery and connector
Material of casing Impact-resistant plastic ABS UL94V-1
Protection class IP20 (EN 60529)
Temperature range -10° C bis +60° C if powered
Humidity 0-95%, non-condensing
Conformity EN 61000-6-2; EN 61000-6-3; EN 62368-1; EN 63311
ETSI EN 301489-1, ETSI EN 301489-3, ETSI EN 300220-2; EN 63000 (RoHS)

*1 The range achieved may vary depending on the spatial conditions. All measurements carried out with standard module antenna.
*2 We reserve the right not to ship the CR2450 lithium button cells in case of airfreight. A credit note will be issued therefore.
*3 The specified value is approximate. The service life may change depending on alarm frequency, temperature and battery age.
*4 For more information on the various operating modes, please refer to the separate data sheets.

Specifications are subject to change without prior notice. All measurements were performed under specific conditions.

DISCLAIMER: This document, as well as all other documents (offers / specifications / letters / etc.), do not guarantee any functionality of our products desired by the customer. heddier electronic GmbH does not guarantee any functionality or marketability desired by the customer. The customer should be able to make his own decision on the basis of the transmitted documents. heddier electronic GmbH supports him in this as far as it is given by the "General Terms and Conditions of Delivery and Business of heddier electronic GmbH".

In no event will heddier electronic GmbH be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this document or the products to which the information refers. Excluded from this are damages caused by negligent behavior or damages regulated by superior laws.

 

 Downloads for this product

  This might be of interest ... 

 

 

brochure

Brochure  


 

 

manual
Installation Manual

            

HDF-BUZZER

Alarm Center

HDF-AMD
Alarm Management

 

hd psv 300x300

   Laserscanner

 

We use cookies on our website. Some of them are essential for the operation of the site. You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.